My washing machine had be down for a year thanks to these guys for fixing it. Now I'm no longer using my hands to wash my clothes.
WASHING MACHINE REPAIRS · HARARE
Washing Machine Not Filling With Water?
Machine Starts but No Water Enters?
A washing machine that starts but takes no water usually has a closed tap, low mains pressure, a blocked inlet filter, a failed inlet valve, or a door lock that has not confirmed. Our technicians test the fill circuit on site in Harare and quote before any work starts.
- Washing machine diagnosis on site
- Front-load & top-load repairs
- Quote before work starts
- Mobile call-outs across Harare
- Independent repairer for all major brands
Call or WhatsApp 0719 227 718
Why Is My Washing Machine Not Filling?
Start with the water. Check the washing machine tap is open, that other taps in the house have pressure, and that the inlet hose is not kinked. Low pressure from the municipal supply or a tank that has run dry is common in Harare. If water is reaching the machine, the usual faults are a blocked mesh filter where the hose connects, a failed inlet valve, or a door lock that has not confirmed so the machine will not let water in.
Samsung machines show 4C or 4E and LG machines show IE when they cannot fill. Our washing machine repairs technicians test the valve and lock on Defy, Hisense and every other brand. Book a repair and tell us whether the house has mains or tank water.
Signs the Machine Is Not Filling Properly
No water entering the drum
The machine hums or clicks, but the drum stays dry.
Very slow filling
Often a blocked inlet filter or low supply pressure.
Cycle pauses waiting for water
The machine times out and shows a fill code.
Only hot or only cold fills
One side of a twin valve has failed on dual-feed models.
Fill code on the display
4C, 4E, IE, E10 and similar codes point to the inlet.
Common Causes of a Fill Problem
These are the usual causes.
- Tap closed or low mains pressure
- Kinked or blocked inlet hose
- Blocked inlet mesh filter
- Failed water inlet valve
- Door lock or lid switch not confirming
- Pressure switch fault
- Control board fault
When to stop using the appliance
Switch the appliance off at the wall if you notice a burning smell, smoke, sparking, exposed wiring, repeated breaker trips or water near electrical parts. Leave electrical covers, high-voltage parts and the heater, motor, pump and anything behind a cover to a technician, then call or WhatsApp 0719 227 718 and we will arrange an assessment.
What Can You Safely Check First?
- Open the washing machine tap fully and check another tap for pressure.
- Straighten any kink in the inlet hose behind the machine.
- Close the door firmly until it clicks, or close the lid fully on a top-loader.
- Check for a child lock or delay timer on the display.
Leave the inlet valve and wiring to the technician. If the hose jumps or the machine trips the power when it tries to fill, switch off and book a visit.
How We Diagnose a Fill Fault
The technician checks the supply pressure, cleans the inlet filter, tests the inlet valve coils and checks that the door lock and pressure switch are signalling correctly.
You get the cause and a quote before any work starts.
Book an appliance repair
Need this washing machine looked at?
Send the brand, the model if you have it, the fault or error code and your suburb. We confirm your booking and arrival time by phone or WhatsApp.
Related washing machine problems
Other Washing Machine Problems We Repair
Washing Machine Not Starting
The machine has power, but the selected wash cycle will not begin.
Washing Machine Not Rinsing
Clothes come out soapy or the rinse stage seems to fail.
Washing Machine Overfilling
Too much water enters the drum or water keeps flowing in.
Washing Machine Not Finishing Cycle
The machine stops mid-cycle, pauses repeatedly or runs far too long.
Washing Machine Error Codes
The machine displays an error message or fault code during operation.
Washing Machine Not Washing
The machine fills or turns, but clothes are still dirty after the cycle.
View All Washing Machine RepairsBrowse All Appliance Problems
Washing machine types
Washing Machines We Repair
Front-Load Washing Machines
Door locks, door-seal leaks and high-speed spin issues are typical on front-loaders.
Top-Load Washing Machines
Lid switches, agitators or impellers and different overflow paths are assessed on top-loaders.
Washer-Dryers
Combined washer-dryers, checked for both the wash and the drying side. Mention it is a washer-dryer when you book.
Automatic Washing Machines
Fully automatic and twin-tub household washers, diagnosed from the point in the cycle where they stop.
Tell us the brand, whether it loads from the front or the top, and the model from the label on the door frame or back panel.
Washing Machine Brands We Repair
We are an independent repairer for all major washing machine brands, not tied to one manufacturer. Choose your brand for the faults those machines commonly develop.
Samsung washing machine repairsLG washing machine repairsDefy washing machine repairsHisense appliance repairsBosch washing machine repairsWhirlpool appliance repairsSpeed Queen appliance repairsSmeg appliance repairsSiemens appliance repairsAEG appliance repairsElectrolux appliance repairsMiele appliance repairsHaier appliance repairsBeko appliance repairsMidea appliance repairs
Washing Machine Repairs Across Harare
Our technicians travel to homes across Harare and nearby towns, so the washing machine is repaired where it is plumbed in.
Harare North
Avondale, Borrowdale, Mount Pleasant, Highlands, Chisipite, plus Mazowe and Domboshava
Harare West
Westgate, Mabelreign, Bluff Hill, Tynwald
Harare East
Greendale, Eastlea, Msasa, Mandara
Harare South
Waterfalls, Hatfield, Cranborne, Glen View
Harare CBD
City Centre, the Avenues, apartments, offices and shops
Ruwa
Ruwa and Zimre Park
Chitungwiza
Chitungwiza households and local businesses
Norton
Norton and surrounding homes
Google reviews
What Our Customers Say
Fridge Repair service was scheduled ASAP -next day actually! Service tech was professional and proficient. Quick and easy fix. He did a great job cleaning up and took great care of my fridge. I would highly recommend this company! A+++ service!
Great service, the team is very proffessional and their level of communication is commendable. My Samsung Fridge Freezer (Side By Side) was repaired right on time and it worked like it was brand new. Thank you so much
Quoted word for word from our Google Business Profile.
Read all our reviews on Google (opens in a new tab)FREQUENTLY ASKED QUESTIONS
Frequently Asked Questions About Washing Machine Not Filling
Why is my washing machine not taking in water?
Check the tap and the house water pressure first. If water is reaching the machine, a blocked inlet filter, a failed inlet valve or a door lock that has not confirmed are the usual causes.
Can a blocked inlet filter stop my washing machine filling?
Yes. A small mesh filter where the hose screws onto the machine catches grit from the supply. When it clogs, the machine fills very slowly or not at all. Cleaning it is quick.
Can low water pressure stop my washing machine working?
Yes. Most machines need a minimum pressure to fill within their time limit, and they stop with a fill code when it is too low. A booster pump or tank supply often solves it.
How much does it cost to fix a washing machine that will not fill?
Cleaning a filter is quick, and an inlet valve is a moderate repair. We diagnose first and quote before any work starts.
Book a washing machine repair in Harare
Tell us what your washing machine is doing and where you are in Harare. We confirm your booking and arrival time by phone or WhatsApp.
Book a washing machine repair
Having Problems With Your Washing Machine?
Call or WhatsApp 0719 227 718 with the brand, the fault or error code and your location. A technician diagnoses the machine at your home and quotes before any work starts.